In the process of using mango skin remover, you may encounter some common problems, which usually affect the working efficiency of the equipment and product quality. This article will introduce a few common mango peeling machine problems and their solutions to help users effectively maintain the equipment, to ensure the machine continues to operate stably.
Uneven peeling or peeling too thick
Problem causes: Uneven peeling or thick peeling of mango skin remover is often due to blade wear, improperly set peeling depth or mechanical failure. Wear and tear of the blade will make it cut not sharp, thus affecting the peeling effect. If the peeling depth is not set correctly, it will also lead to uneven peeling.
Solution: Firstly, check whether the blades are sharp or not, if the blades show obvious wear, they need to be replaced in time. Secondly, check the depth adjustment system of the machine to ensure that the peeling depth meets the requirements. Most modern mango peelers are equipped with an adjustable depth control system, which can adjust the peeling depth according to different mango sizes and needs to ensure even peeling.
Stuck or stopped conveyor belt
Problem Cause: Stuck or stopped conveyor belts are usually caused by excessive friction in the conveyor system, damage to mechanical parts or insufficient lubrication. When the conveyor belt is too tight or the friction resistance is too high, it may cause the equipment to run poorly or even stop working.
Solution: Check the elasticity of the conveyor belt to ensure that it is installed correctly and is not overstretched. Regularly inspect the surface of the belt to ensure that it is not worn or damaged. If there is excessive friction resistance, add appropriate lubricant to the conveyor system to ensure smooth operation. Also, check the motor and pulleys of the conveyor belt to make sure there is no damage and repair or replace them in a timely manner.
Abnormal noise when the machine starts
Problem cause: When the mango skin remover makes abnormal noise when starting, it is usually caused by loose internal parts of the machine, insufficient lubrication or wear and tear of parts. Common parts include the motor, pulleys, blades, and so on.
Solution: First check the motor and other moving parts to make sure they are not loose or damaged. If there are loose parts, they need to be tightened or replaced in time. Secondly, check the lubrication of the machine, especially the parts running under high load, to ensure enough lubricant to reduce friction and noise. If the noise persists, it is recommended to contact a professional maintenance personnel for inspection to avoid bigger problems caused by component failure.
Overall, common faults of mango skin remover can usually be solved by regular inspection and maintenance to keep the equipment in good running condition. Regularly replacing the blades, checking the conveyor system, lubricating the various moving parts, and ensuring that the depth is set correctly can effectively minimize the occurrence of equipment malfunctions. By finding and solving these problems in time, food processing plants can maximize the efficiency of the mango skin removal machine and ensure the stable operation of the production line.
